Temporary Fencing for Construction Sites: Complete Guide
Types of temp fencing for Colorado job sites, how pricing works, permits to know about, and how installation typically runs from first call to walk-through.
Written by The Junk Trunk team — Denver's site services operator since 2016 with 4.9 stars from 1,900+ verified Google reviews.
Temporary construction fencing in Denver costs $3.60 per linear foot for installation, with monthly rentals at $175/month after the first month. Standard panels are 6 feet tall by 12 feet wide chain link. Here's everything you need to know about types, permits, and installation for Colorado job sites.
What types of temporary fencing are used on Denver job sites?
Panel-style chain link is the standard for urban infill and residential rebuilds: bases, panels, clamps, and sometimes privacy screen or windscreen for dust control on windy Front Range afternoons. Orange mesh on T-posts still shows up on quick utility patches, but most metro building departments expect something sturdier when a site is active for more than a few days. Gates — pedestrian and vehicle — are add-ons worth planning early; nothing slows concrete pours like a fence line that forgot a twelve-foot opening.
How is temporary construction fencing priced in Denver?
At The Junk Trunk we publish transparent fencing math: installation at three dollars sixty cents per linear foot, monthly rental after the first month, windscreen options, and a minimum order that covers mobilization. That structure means a two-hundred-foot perimeter has a predictable install line on your budget, and you are not guessing what “per panel” means when panel widths differ between vendors.
Commercial GCs often bundle fencing with dumpsters and portable toilets on one quote so you are not chasing three invoices while concrete is setting.
What permits and rules apply to construction fencing in the Denver metro?
Rules vary by city and county. Denver may require right-of-way permits if your fence sits on a sidewalk zone; suburban sites in Douglas County might focus more on HOA design criteria. Your permit set may already specify fence height and mesh type — match it exactly so re-inspection does not cost you a pour day. When in doubt, send us the sheet; we have worked with inspectors from Boulder to Parker and can flag conflicts before we mobilize.
How to choose height and layout
Match fence height to excavation depth and adjacent uses — deeper digs and busier sidewalks warrant taller panels. Plan pedestrian detours if you are blocking a walkway; angry neighbors call the city faster than you can pour footings. Leave room for deliveries: roll-off trucks, pumpers, and drywall rigs all need clear lines. If you are also renting a dumpster from us, we coordinate drop zones so the gate and the box are not fighting for the same ten feet.
Installation process from first call
You share site address, linear footage, gate needs, and start date. We confirm access — tight alleys in Baker need different trucks than a greenfield lot in Erie. Crews deliver panels, set bases, tension the run, and hang gates. Same-day fixes are available for urgent city corrections, but the smooth path is booking before your permit inspection window.
Wind matters on the plains; we set bases and bracing to handle afternoon gusts that sneak down from the mountains. If you add windscreen, expect more wind load — we factor that into spacing.
Coordinating with other site services
The best Denver job sites run one dispatcher for toilets, fencing, and waste. That is why we built the site-services flow: one call, aligned schedules, fewer “sorry, the fence crew is Tuesday and the dumpster is Wednesday” moments.
If you are bidding a new project, get fencing on the schedule before the first sidewalk closure complaint hits your voicemail.
Inspection fixes and change orders
When a city inspector tags a gap at a gate hinge or requests additional bracing after a wind event, send photos — we can often mobilize a repair faster than a full reinstall. Keep spare panel counts in your superintendent notes; adding ten feet mid-project is routine, but only if the original run left room for clamps and tension bars. Document the as-built line with photos for closeout; it helps on the next phase when a new PM inherits the site.
Send us a site map or rough footage — we will turn it into a line-item quote you can drop straight into your budget. Start with our fence estimator or call dispatch; we will walk the math with you and lock a install date that matches your permit timeline.